 |
|
|
--Starter Kit or Evaluation Board
phyCORE-167Cx
Version: 1177.1
PHYTEC MeBtechnik GmbH
Microcontrollers Support:
|
C166 Family:
|
C167CR-16RM, C167CR-4RM, C167CR-LM, C167CS-4RM, C167CS-LM, C167SR-LM
|
|
|
Platforms:
|
MS-DOS, Win NT, Win 3.1, Win 95, Win 98, Win 2000
|
|
Requirements:
|
IBM Compatible PC
|
|
Package includes:
|
phyCORE-167Cx
(Infineon C167CR/C167CS, 20 MHz, 256 KB SRAM, 256 KB Flash); Schematics and Spectrum CD-ROM with Hardware Manual, software development tools, example programs and FlashTools
|
|
Price:
|
|
|
Order Code:
|
PCM-009
|
|
Availability:
|
Now
|
Description:
The phyCORE-167 supports high-end 16-bit C167CR and C167CS controllers from Infineon featuring on-chip CAN and Flash. The module is intended for use in memory-intensive applications and in driving a CAN-bus interface. Smaller than a credit card (55 by 47 mm.), the standard board is populated with the Infineon C167CR controller, runs at a 20 MHz clock speed and offers a standard external memory of 256 KB (to 1 MB) SRAM and 256 KB (to 2 MB) Flash. If populated with the C167CS, the module offers dual 2.0B CAN. PHYTEC FlashTools enable easy on-board download of user code. All controller signals and ports extend to 2x100-pin rows of high-density (0.635) Molex connectors aligning two edges of the board. These pins provide a 16-bit bi-directional I/O port, 64+ free port lines, a 16-channel ADC with 10-bit resolution and two RS-232 interfaces.
|
|
Standards Compliance:
|
ISO9001
|
|
Product Manager:
|
Thomas L. Walker
|
|
Email:
|
info@phytec.com
|
|
Product URL:
|
http://www.phytec.com/modules/pc167.htm
|
|
|
|
