 |
|
|
--Starter Kit or Evaluation Board
Micropac 515C
EMAC Incorporated
Microcontrollers Support:
|
C500 Family:
|
SAB 80C515, SAB 80C515A, SAB 80C535 |
|
|
Platforms:
|
MS-DOS, Win 3.1, Win 95, Win 98
|
|
Requirements:
|
|
|
Package includes:
|
MicroPac 515C Single board computer
Hardware manual
ROM monitor for downloading and debugging software
Distribution Disk Containing:
- assembly language drivers for on-board devices
- shareware assembler
|
|
Price:
|
|
|
Order Code:
|
E351-01
|
|
Availability:
|
immediate
|
Description:
The MicroPac series of single board computers feature micro size with micro power consumption at a micro price. The MicroPac 515C has dimensions of 5.375" by 3.625" with a power requirement of 45 mA typical, and 80 mA with the DUART upgrade option installed.
The MicroPac 515C is ideally suited for controller applications requiring in-circuit Flash reprogramming, on-board graphic or character LCDs and/or keypad interface circuitry. It is also ideal for low cost data acquisition and control applications. The 8 channels of A/D allow the board to be connected to temperature sensors, pressure sensors, strain gauges, and LVDTs.
FEATURES
CPU: Infineon C515C with 9.216 MHz crystal speed. Improved architecture results in 651 nS instruction cycle time at 9.216 MHz.
CAN MODULE: An optional CAN interface is available. It is a full CAN module version 2.0 B active with 15 message objects and basic-CAN feature with data rates approaching 1 MBaud. The module has 256 register/data bytes allocated in external data memory area.
DIGITAL I/O: 19 programmable I/O lines, 8 high current outputs, and an optional 2 inputs and 3 output lines. When the CAN option and keypad decoder are not installed, an additional 8 TTL level, bit programmable I/O lines are available on a 10 pin header.
ANALOG INPUTS: Fast 8 channel, 10 bit analog to digital converter with an 10.4 microsecond conversion rate. A/D inputs may be also be used as an additional 8 digital inputs.
ANALOG OUTPUTS: The optional D/A has 4 channels with 8 bit resolution.
COUNTER/TIMERS/PWM: Three, 16 bit counter/timers are included standard. One of these has four I/O lines which can be used as compare outputs, or capture inputs (for Pulse Width Modulation/Demodulation). A watchdog timer is also provided. An additional 16 bit counter/timer is included with purchase of the serial upgrade option.
COMMUNICATION: The 515C is capable of supporting up to 4 RS232 serial ports, 1 is standard and 3 are included with the purchase of optional upgrades. Conversion of up to 3 ports from RS232 to RS422/485 is available optionally.
KEYPAD/SERIAL: An optional 20 key, keypad interface and an extra RS232 serial port may be added. This option is implemented with a coprocessor which may be custom programmed by EMAC for almost unlimited capabilities.
INTERFACES: A Backlit LCD interface for character and graphic displays is included. Also included is a 50 pin bus expansion header for connecting to external peripherals.
MEMORY: In addition to the 256 bytes of IRAM and 2K of XRAM memory within the C515C, there is provision for up to 128K of EPROM or FLASH and up to 512K of RAM. Total memory capacity is 640K bytes. The C515C directly accesses 128K of memory (64K EPROM and 64K RAM) with the balance being Banked Selected memory. A 32K ROM Monitor and a 32K RAM is included. A parameter storage area is implemented with a 1K bit serial EEPROM.
|
|
Standards Compliance:
|
|
|
Product Manager:
|
Matt Eastman
|
|
Email:
|
info@emacinc.com
|
|
Product URL:
|
http://www.emacinc.com/SBC_micro_fr.htm
|
|
|
|
